DFI Journal - The Journal of the Deep Foundations Institute
Volume 17, Issue 1, April 2023
DOI: 10.37308/DFIJnl.20221114.264
All Journal papers are free to DFI members.
If you are a member, please click on the "Login" link at the top of this page to to download this paper.
Not a member? Join here to get access to all papers or click the purchase button below to access this paper only.
Experimental Investigation of Helical Pile Performance for Loess Deposits Improvement
Article Type: Research Paper
Eslami, A., et al.
Abstract
Collapsible loess is classified as problematic soil found on most continents. The loess immediately collapses under stresses induced by axial compressive loading or the soil weight when exposed to moisture. In Iran, vast areas of the Golestan province are covered with Aeolian loess deposits. This paper investigates whether the simultaneous effect of inundation and pre-loading in helical pile installation is operative and effective in improving Golestan loess. The effect of installation conditions on loess collapsibility is studied via two main approaches, i.e., field investigations and physical modeling. The experimental studies include the installation of ten single and triple helix piles in the Amirkabir University of Technology Frustum Confining Vessel, i.e., FCV-AUT. Also, ten single and double helix piles with embedment depth of 3 to 6 m and a helix diameter of 250 mm were installed in Golestan province, and full-scale pile static loading tests were performed. The results indicated that the simultaneous application of crowd loading and water pressure during the installation of helical piles results in collapsibility potential reduction due to the soil treatment. Moreover, high or low crowd loads accompanied by water pressure during pile installation bring about similar load-displacement behavior of model piles installed in FCV-AUT and full-scale helical piles. Eventually, it was illustrated that the applied improvement technique is effective on loess soils since it uses the least amount of material, machinery, and equipment while attaining the highest possible bearing capacity ratio regarding sustainability.
Keywords:
Golestan Loess, Helical Pile, Wet & Dry Method, FCV-AUT, Full-Scale Testing, Ground Improvement