Volume 16, Issue 2, November 2022
DOI: https://doi.org/10.37308/DFIJnl.20220512.265
All Journal papers are free to DFI members.
If you are a member, please click on the "Login" link at the top of this page to to download this paper.
Not a member? Join here to get access to all papers or click the purchase button below to access this paper only.
Combined Effects of Liquefaction-Induced Lateral Spreading and Superstructure Inertial Loads on Pile Foundations
Article Type: Research Paper
Martinez, J.A., Khosravifar, A., Ebeido, A., & Elgamal, A.
Pile foundations in sloping or gently sloped liquefiable soils are often subjected to a combination of inertial and lateral spreading loads. Current design codes vary significantly in terms of the methods used to analyze and design piles that are subjected to combined loading. The results from a full-scale shake table test on a 0.25-m-diameter reinforced concrete pile in gently sloping ground are used in this study to back-calculate the inertial loads, the kinematic loads, and the interaction between inertial and kinematic loads during seismic loading. It was found that large pile strains developed after liquefaction was triggered. The maximum pile strains (and curvatures) at shallow depths within the nonliquefiable crust were correlated with maximum inertial loads in the upslope direction that were resisted by a crust load applied in the downslope direction, indicating an out-of-phase interaction. The maximum pile strains (and curvatures) at deeper locations below the loose liquefiable sand were correlated with the maximum inertial loads in the downslope direction but without any resistance or driving load from the crust (i.e., no lateral spreading load during peak downslope inertial cycles). The lack of crust load during the downslope inertial cycles was attributed to the pile head outrunning the crust displacement, causing the pile to be pushed into a gap that had formed on the downslope front of the pile. The findings of this study contribute a data point to a wide range of inertial and kinematic interaction factors proposed by other studies and highlight the site- and project-dependency of interactions between inertial and kinematic loads.
Keywords:
Pile foundations, liquefaction, lateral spreading, combined inertial and kinematic loading